Brother MFC260C Service Manual page 373

EEPROM CUSTOMIZING CODES
This function allows you to customize the EEPROM according to language, function settings, and
firmware switch settings.
Refer to the "EEPROM Customizing Codes List" on the next page.
Operating Procedure
(1) Press the Menu and Black Start (Mono Start) keys in this order. Next press the
times to make the machine enter the maintenance mode.
TIP: FAX models equipped with a numerical keypad can enter the maintenance mode in the
same way as conventional models; that is, by pressing the Menu, *, 2, 8, 6 and 4 keys in this
order.
The machine beeps for approx. one second and displays "
LCD, indicating that it is placed in the initial stage of the maintenance mode, a mode in which
the machine is ready to accept entry from the keys.
(2) Start customizing the EEPROM (with Function code 74) as follows:
Press the 7 and 4 keys in this order in the initial stage of the maintenance mode.
The current customizing code appears on the LCD.
(3) Enter the desired customizing code.
To enter letters "A" through "F," press the 1 through 6 keys while holding down the # key,
respectively.
The newly entered code appears.
NOTE: If a wrong 4-digit code is entered, the machine will malfunction.
(4) Press the Black Start (Mono Start) key.
The machine saves the setting and returns to the initial stage of the maintenance mode.
If you press the Stop/Exit key or no keys are pressed for one minute in the above procedure,
the machine stops the procedure and returns to the initial stage of the maintenance mode.
App. 3-1
key four
" on the
Confidential