If You Replace The Main Pcb; 1 ] Load Programs; 2 ] Initialize The Eeprom On The Main Pcb (Function Code 01); 3 ] Specify The Cis Type (Function Code 59) - Brother MFC260C Service Manual

Facsimile equipment
Hide thumbs Also See for MFC260C:
Table of Contents

Advertisement

7.3 IF YOU REPLACE THE MAIN PCB

NOTE: If the main PCB is replaced, you should also replace both of the ink absorber box and flushing box.
Using the machine without replacing them for a long period may cause an overflow of drained ink from them,
thereby staining the machine.

[ 1 ] Load programs

If the main PCB is replaced with a new one, load the desired programs onto the flash ROM. Refer to
Appendix 2, page App.
If the main PCB is replaced with the one used for any other machine, follow the steps below.
(1) Change the firmware stored in the flash ROM. Refer to
(2) Reset each of the purge and flushing counters with the following procedure.
1) Press the Menu and Black Start (Mono Start) keys in this order. Next press the
times to make the machine enter the maintenance mode.
TIP: FAX models equipped with a numerical keypad can enter the maintenance mode in the
same way as conventional models; that is, by pressing the Menu, *, 2, 8, 6 and 4 keys in this
order.
The machine beeps for approx. one second and displays "
LCD, indicating that it is placed in the initial stage of the maintenance mode, a mode in
which the machine is ready to accept entry from the keys.
2) Press the 8 and 0 keys in this order.
3) Press the Black Start (Mono Start) key several times until the purge (or flushing) count
appears on the LCD.
4) Press the 2, 7, 8, and 3 keys in this order to reset the purge (or flushing) count.
5) Press the Stop/Exit key to return to the initial stage of the maintenance mode.
6) Press the 9 key twice to exit from the maintenance mode.
[ 2 ]
Initialize the EEPROM on the main PCB (Function code 01)
Refer to
Chapter 9, Section

[ 3 ] Specify the CIS type (Function code 59)

Refer to
Chapter 9, Section

[ 4 ] Customize the EEPROM on the main PCB (Function code 74)

Refer to
Chapter 9, Section
2-5.
9.1.4.1.
9.1.4.13.
9.1.4.19.
7-25
Appendix 2, page App.
2-7.
key four
" on the
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc685cwMfc680cnMfc465cnMfc265cMfc885cwMfc235c

Table of Contents