Brother MFC260C Service Manual page 128

(11) General communications-related
Code 1
B0
B0
B0
BF
BF
BF
* Establishment of FAX communication
FAX communication is established when the calling station receives a DIS (reception capability)
signal from the called station and the called station receives an NSS or DCS (communications test)
signal from the calling station.
(12) Maintenance mode
Code 1
E0
E0
(13) Equipment error
Code 1
FF
Code 2
02 Unable to receive the next-page data.
03 Unable to receive polling even during turn-around transmission
due to call reservation.
04 PC interface error.
01 Communication canceled by pressing the STOP key before
establishment of FAX communication*.
02 Communication canceled by pressing the STOP key after
establishment of FAX communication*.
03 Transmission canceled due to a scanning error caused by no
document or document feed problem in ADF scanning in real time
transmission.
Code 2
01 Failed to detect 1300 Hz signal in burn-in operation.
02 Failed to detect PB signals in burn-in operation.
Code 2
X X Equipment error. (For X X, refer to
Causes
Causes
Causes
4 - 2 7
Section 4.1.1 [ 2 ].)
Confidential