Preparation - Brother MFC260C Service Manual

Preparation

Prior to proceeding with the disassembly procedure,
(1) Unplug the following:
- Power cord from the electrical outlet
- Modular jack of the telephone line from the machine
- Modular jack of the curled cord*
- USB cable, if connected
- LAN cable*
- USB digital camera cable or USB flash memory drive, if connected
- Modular jack of the external telephone set, if connected
(2) Remove the following:
- Paper tray ASSY
- Handset mount*
(3) Remove memory cards*
Telephone line cord
Handset*
Removing the handset mount
Handset mount*
Pull the tab on the bottom of the
handset mount outwards, and
remove the handset mount in the
direction of the arrow.
2
, if connected
1
(see the illustration below)
3
if inserted in the machine.
1
1
1
(and remove the handset*
Installing the handset mount
Align the
machine and handset mount with
each other and slide the handset
mount in the direction of the arrow.
6- 3
1
)
* 1 For models with handset
*2 For wired LAN-enabled models
*3 For models with PhotoCapture Center
Paper tray ASSY
markings on the
(6_01)
Confidential