Preparation
Prior to proceeding with the disassembly procedure,
(1) Unplug
- the power cord from the electrical outlet and the machine,
- the modular jack of the telephone line from the machine,
- the modular jack of the curled cord* (and remove the handset*), and
- the modular jack of the external telephone set if connected (not shown below).
(2) Remove
- the document wire,
- the paper tray and paper wire extension, and
- the print cartridge.
Handset*
Telephone
line cord
Power cord
How to Access the Object Component
• On the next page is a disassembly flowchart which helps you access the object components. To
remove the drive unit, for example, first find it on the flowchart and note its number (
case). To access it, you need to remove all the parts above the drive unit on the flowchart (
,
and
• Unless otherwise specified, all parts should be replaced in the reverse order to which they were
removed to reassemble the machine.
Print cartridge
in this case) before the drive unit itself can be removed.
*Not provided on the FAX-T102.
Document wire
5-3
Paper wire extension
Paper tray
in this
Confidential
,