Limit Switches: Check - AUMA SAEx 07.2 Manual

SAEx 07.2 SAEx 16.2 / SAREx 07.2
AUMA MATIC AMExC 01.1
9.6.2.

Limit switches: check

SAREx 16.2
4. With mechanical position indication:
Observe direction of rotation.
The direction of rotation is correct if the actuator moves in direction
CLOSE and:
- For position indication with symbols OPEN/CLOSED = indicator disc turns
counterclockwise.
Figure 36: Position indication with symbols OPEN/CLOSED
5. Without mechanical position indication:
Unscrew threaded plug [1] and seal [2] or protective cap for stem protection
tube [4] and observe direction of rotation at hollow shaft [3] or the stem
[5].
The direction of rotation is correct if the actuator moves in direction CLOSE
in clockwise direction, or the stem moves downward.
Figure 37: Hollow shaft/stem movement for clockwise closing
[1] Threaded plug
[2] Seal
[3] Hollow shaft
[4] Protective cap for stem protection tube
[5] Stem
[6] Stem protection tube
1. Set selector switch to position Local control (LOCAL).
Commissioning (basic settings)
41