SAEx 07.2
SAEx 16.2 / SAREx 07.2
AUMA MATIC AMExC 01.1
4.5.1.
Mounting positions: modify
SAREx 16.2
Flameproof enclosure, danger of explosion!
Risk of death or serious injury.
Before opening, ensure that there is no explosive gas and no voltage.
Handle cover and housing parts with care.
Joint surfaces must not be damaged or soiled in any way.
Do not jam cover during fitting.
1.
Loosen screws and remove local controls.
2.
Loosen 3 screws of the board, turn board to the new position and tighten the
screws.
3.
Check whether O-ring is in good condition, correctly insert O-ring.
4.
Turn local controls into new position and re-place.
Cable damage due to twisting or pinching!
Risk of functional failures.
Turn local controls by a maximum of 180°.
Carefully assemble local controls to avoid pinching the cables.
5.
Fasten screws evenly crosswise.
Assembly
19