Safety instructions
Information
1.3.
Warnings and notes
1.4.
References and symbols
Information
6
Industrial trucks
Lifting appliances
Passenger lifts
Service lifts
Escalators
Continuous duty
Buried service
Continuous submersion (observe enclosure protection)
Radiation exposed areas in nuclear power plants
No liability can be assumed for inappropriate or unintended use.
Observance of this operation manual is considered as part of the device's designated
use.
This operation manual is only valid for the "clockwise closing" standard version, i.e.
driven shaft turns clockwise to close the valve.
The following warnings draw special attention to safety-relevant procedures in this
operation manual, each marked by the appropriate signal word (DANGER, WARNING,
CAUTION, NOTICE).
Indicates a hazardous situation that, if not avoided, will result in death or seri-
ous injury.
Indicates a hazardous situation that, if not avoided, could result in death or
serious injury.
Indicates a hazardous situation that, if not avoided, could result in minor or
moderate injury.
Indicates information considered important, but not hazard related (e.g. mes-
sages related to property damage).
Arrangement and typographic structure of the warnings
Type of hazard and respective source!
Possible consequence(s) in case of non-observance (option)
Measures to avoid the danger
Further measure(s)
Safety alert symbol
The signal word (here: DANGER) indicates the level of hazard.
The following references and symbols are used in these instructions:
The term Information preceding the text indicates important notes and information.
Symbol for CLOSED (valve closed)
Symbol for OPEN (valve open)
SAEx 07.2
SAEx 16.2 / SAREx 07.2
warns of a potential personal injury hazard.
SAREx 16.2
AUMA MATIC AMExC 01.1