Lexmark XM5100 Series User Manual page 32

Table of Contents

Advertisement

Additional printer setup
3
Align the notch (1) on the memory card with the ridge (2) on the connector.
4
Push the memory card straight into the connector, and then push the card toward the controller board wall
until it clicks into place.
5
Reattach the controller board shield, and then the controller board access cover.
Installing an optional card
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware
or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power
cord from the electrical outlet before continuing. If you have any other devices attached to the printer,
then turn them off as well, and unplug any cables going into the printer.
1
2
32

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xm5200 seriesXm5270Xm5263

Table of Contents