Lexmark XM5100 Series User Manual page 241

Maintaining the printer
Ordering a maintenance kit
To identify the supported fuser type, view the label on the fuser. Do either of the following:
•
Remove the toner cartridge and the imaging unit. The two-digit fuser type code (such as 00 or 01) can be
seen on the front of the fuser.
Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes.
Extended exposure to light may cause print quality problems.
•
Pull down the printer rear door. The two-digit fuser type code (such as 00 or 01) can be seen on the rear of
the fuser.
Notes:
•
Using certain types of paper may require more frequent replacement of the maintenance kit.
•
The separator roller, fuser, pick roller assembly, and transfer roller are all included in the maintenance kit
and can be individually ordered and replaced if necessary.
•
For more information on replacing the parts included in the maintenance kit, see the instruction sheet
that came with each part.
Lexmark Return Program fuser maintenance kit type
Type
XM5100 Series Return Program fuser maintenance kit Type 00
XM5100 Series Return Program fuser maintenance kit Type 01
XM5100 Series Return Program fuser maintenance kit Type 02
XM5100 Series Return Program fuser maintenance kit Type 03
XM5100 Series Return Program fuser maintenance kit Type 04
Lexmark regular fuser maintenance kit type
Type
XM5100 Series regular fuser maintenance kit Type 05
XM5100 Series regular fuser maintenance kit Type 06
XM5100 Series regular fuser maintenance kit Type 07
XM5100 Series regular fuser maintenance kit Type 08
XM5100 Series regular fuser maintenance kit Type 09
Lexmark roller kit
XM5100 Series roller kit
Lexmark ADF maintenance kit
XM5100 Series ADF maintenance kit
Part number
40X8420
40X8421
40X8422
40X8423
40X8424
Part number
40X8425
40X8426
40X8427
40X8428
40X8429
Part number
40X7706
Part number
40X8431
241