Lexmark XM5100 Series User Manual page 183

Understanding the printer menus
Use
Contact Name
Location
Alarms
Alarm Control
Cartridge Alarm
Timeouts
Standby Mode
Disabled
1–240
Timeouts
Sleep Mode
Disabled
1–120
Timeouts
Print with Display Off
Allow printing with display off
Display on when printing
Timeouts
Hibernate Timeout
Disabled
20 minutes
1 hour
2 hours
3 hours
6 hours
1 day
2 days
3 days
1 week
2 weeks
1 month
To
Specify a contact name for the printer.
Note: The contact name is stored on the Embedded Web
Server.
Specify the printer location.
Note: The location is stored on the Embedded Web Server.
Set an alarm when the printer requires user intervention.
Select from the following options:
Off
Single
Continuous
Notes:
•
Single is the factory default setting for Alarm Control.
•
Off is the factory default setting for Cartridge Alarm.
Set the idle time before the printer enters a lower power state.
Note: 15 minutes is the factory default setting.
Set the idle time before the printer begins operating in Sleep
mode.
Notes:
•
20 minutes is the factory default setting.
•
Disabled appears only when Energy Conserve is set to
Off.
Print a job with the display turned off.
Note: Display on when printing is the factory default setting.
Set the time before the printer enters Hibernate mode.
Note: 3 days is the factory default setting.
183