Lexmark XM5100 Series User Manual page 205

Understanding the printer menus
Use
ADF Multi‑feed Sensor
On
Off
Scan edge to edge
Off
On
Sharpness
1–5
Temperature
‑4 to 4
Use cc:/bcc:
Off
On
FTP Settings menu
Use
Format
PDF (.pdf)
TIFF (.tif)
JPEG (.jpg)
XPS (.xps)
RTF (.rtf)
TXT (.txt)
PDF Settings
PDF Version
1.2–1.7
A–1a
PDF Compression
Normal
High
Secure PDF
Off
On
Searchable PDF
Off
On
Content Type
Text
Graphics
Text/Photo
Photo
To
Detect when the ADF picks more than one sheet of paper at once.
Note: On is the factory default setting.
Specify whether the original document is scanned edge-to-edge.
Note: Off is the factory default setting.
Adjust the amount of sharpness on a scanned image.
Note: 3 is the factory default setting.
Specify warm or cool outputs. Cool values generate a bluer output than the
default while warm values generate a redder output than the default.
Enable the use of the cc: and bcc: fields.
Note: Off is the factory default setting.
To
Specify the file format.
Note: PDF (.pdf) is the factory default setting.
Configure the PDF settings.
Notes:
•
1.5 is the factory default setting for PDF Version.
•
Normal is the factory default setting for PDF Compression.
•
Off is the factory default setting for Secure PDF and Searchable PDF.
Secure PDF requires you to enter your password twice.
Specify the content of the original document.
Note: Text/Photo is the factory default setting.
205