Lexmark XM5100 Series User Manual page 184

Understanding the printer menus
Use
Hibernate Timeout on Connection
Hibernate
Do Not Hibernate
Timeouts
Screen Timeout
15–300
Timeouts
Print Timeout
Disabled
1–255
Timeouts
Wait Timeout
Disabled
15–65535
Timeouts
Job Hold Timeout
5–255
Error Recovery
Auto Reboot
Reboot when idle
Reboot always
Reboot never
Error Recovery
Max Auto Reboots
1–20
Print Recovery
Auto Continue
Disabled
5–255
Print Recovery
Jam Recovery
On
Off
Auto
To
Set the printer to Hibernate mode even if there is an active
Ethernet connection.
Note: Hibernate is the factory default setting.
Set the idle time before the display automatically returns to
Ready state.
Note: 30 seconds is the factory default setting.
Set the printer to end a print job after it has been idle for the
specified amount of time.
Notes:
•
90 seconds is the factory default setting.
•
Print Timeout is available only when using PCL
emulation.
Set the time that the printer waits for more data before
canceling a print job.
Notes:
•
40 seconds is the factory default setting.
•
Wait Timeout is available only when the printer is using
PostScript emulation.
Set the time that the printer waits for user intervention before
it holds jobs that require unavailable resources.
Notes:
•
30 seconds is the factory default setting.
•
This menu item appears only when a hard disk is
installed.
Set the printer to restart when an error occurs.
Note: Reboot always is the factory default setting.
Determine the number of automatic reboots the printer can
perform.
Note: 2 is the factory default setting.
Let the printer automatically continue printing from certain
offline situations when these are not resolved within the
specified time period.
Note: Disabled is the factory default setting.
Specify whether the printer reprints jammed pages.
Note: Auto is the factory default setting.
184