Lexmark XM5100 Series User Manual page 198

Understanding the printer menus
Use
Speaker Volume
High
Low
Ringer Volume
Off
On
Answer On
Use
All Rings
Single Ring Only
Double Ring Only
Triple Ring Only
Single or Double Rings Only
Single or Triple Rings Only
Double or Triple Rings Only
Fax Mode (Fax Server Setup) menu
Fax Mode sends the fax job to a fax server for transmission.
Use
To Format
Reply Address
Subject
Message
SMTP Setup
Primary SMTP Gateway
Secondary SMTP Gateway
Image Format
PDF (.pdf)
XPS (.xps)
TIFF (.tif)
Content Type
Text
Graphics
Text/Photo
Photo
To
Set the speaker volume to high or low.
Note: High is the factory default setting.
Enable or disable the ringer volume.
Note: On is the factory default setting.
To
Specify ring patterns when the printer is answering calls.
Note: All Rings is the factory default setting.
To
Enter specific fax information.
Specify SMTP setup information.
Specify SMTP server port information.
Specify the image format.
Note: PDF (.pdf) is the factory default setting.
Specify the content of the original document.
Note: Text/Photo is the factory default setting.
198