Copying Photos; Copying On Specialty Media - Lexmark XM5100 Series User Manual

Copying
•
The ADF indicator light comes on when the paper is loaded properly.
2
Adjust the paper guides.
3
From the home screen, navigate to:
Copy > specify the copy settings > Copy It
Copying using the scanner glass
1
Place an original document facedown on the scanner glass in the upper left corner.
2
From the home screen, navigate to:
Copy > specify the copy settings > Copy It
If you have more pages to scan, then place the next document on the scanner glass, and then touch Scan
the next page.
3
Touch Finish the Job.

Copying photos

1
Place a photo facedown on the scanner glass in the upper left corner.
2
From the home screen, navigate to:
Copy > Content > Photo >
3
From the Content Source menu, navigate to:
Photo/Film >
Note: If you have more photos to copy, then place the next photo on the scanner glass, and then touch
Scan the next page.
4
Touch Finish the Job.

Copying on specialty media

Copying on transparencies
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
From the home screen, navigate to:
Copy > Copy from > select the size of the original document >
> Copy It
95