Input Elements - GE Multilin MIWII Instruction Manual

6.1 INPUT CONFIGURATION
The following table shows the list of elements that can be assigned to each input. The table is divided into groups
Table 6–1: INPUT ELEMENTS(MIWII1000)
MASK ED 1
MASK ED 2
INPUTS
Table 6–2: INPUT ELEMENTS(MIWII2000)
6
MASK ED 1
MASK ED 2
INPUTS
6-4
NO DEFINITION
40 Disable (by DI)
32_1 Disable (by DI)
32_2 Disable (by DI)
32_3 Disable (by DI)
DI all functions disable
Trip Disabled (by DI)
52 B status
Trip contact close (PULSE)
Group change
Sett. change disabled
Reset (PULSE)
Oscillo trigger (PULSE)
General input
NO DEFINITION
32_1 Disable (by DI)
32_2 Disable (by DI)
32_3 Disable (by DI)
DI all functions disable
Trip Disabled (by DI)
32_4 Disable (by DI)
52 B status
Trip contact close (PULSE)
Group change
Sett. change disabled
Reset (PULSE)
Oscillo trigger (PULSE)
General input
MIWII Directional Power Protection System
INPUT NOT ASSIGNED
40 trip disabled
32_1 trip disabled
32_2 trip disabled
32_3 trip disabled
DI all functions disable
Trip Disabled
Breaker open indication
This element allows activating the trip output
This setting has to be enabled for setting group 2. If
disabled, the active setting group is the one defined in
ADVANCED GENERAL SETTINGS
Enabled means that settings and active group cannot be
changed.
It is only possible to switch to Group 2 through digital input
Group change
This element resets latched LEDs and outputs
Triggers oscillography element
Generic element that may be used in logic configuration.
INPUT NOT ASSIGNED
32_1 trip disabled
32_2 trip disabled
32_3 trip disabled
DI all functions disable
Trip Disabled
32_4 trip disabled
Breaker open indication
This element allows activating the trip output
This setting has to be enabled for setting group 2. If
disabled, the active setting group is the one defined in
ADVANCED GENERAL SETTINGS
Enabled means that settings and active group cannot be
changed.
It is only possible to switch to Group 2 through digital input
Group change
This element resets latched LEDs and outputs
Triggers oscillography element
Generic element that may be used in logic configuration.
6 I/0 CONFIGURATION

6.1.2 INPUT ELEMENTS

GEK-113308