GE Multilin MIWII Instruction Manual page 108

6.2 OUTPUTS AND LEDS CONFIGURATION
Table 6–5: OUTPUTS AND LEDS ELEMENTS (MIWII2000)
GROUP
CONFIGURATION
TRIP 1
TRIP 2
PICKUP 1
PICKUP 2
TRIP READY 1
6
TRIP READY 2
MISCELLANEOUS 2
MISCELLANEOUS 1
INPUTS / OUTPUTS
MIXED 1
LEDS
MIXED 2
Virtual trip signals are activated as soon as the protection unit trip conditions are present, independently from the enable
setting. This signal can be used to activate LEDs or auxiliary outputs. If the user wants the protection unit to trip, then the
trip enable setting must be activated. In this case, the relay will activate the trip contact.
6-8
NO DEFINITION OUTPUT OR LED NOT ASSIGNED
Logic 1 Output signal from logic 1
Logic 2 Output signal from logic 2
Logic 3 Output signal from logic 3
Logic 4 Output signal from logic 4
32_1 Alarm Alarm of Function 32_1
32_1 Trip Trip of Function 32_1
32_2 Alarm Alarm of Function 32_2
32_2 Trip Trip of Function 32_2
32_3 Alarm Alarm of Function 32_3
32_3 Trip Trip of Function 32_3
32_4 Alarm Alarm of Function 32_4
32_4 Trip Trip of Function 32_4
General Trip General trip
32_1 Alarm Pickup Pickup Alarm of Function 32_1
32_1 Pickup Pickup of Function 32_1
32_2 Alarm Pickup Pickup Alarm of Function 32_2
32_2 Pickup Pickup of Function 32_2
32_3 Alarm Pickup Pickup Alarm of Function 32_3
32_3 Pickup Pickup of Function 32_3
32_4 Alarm Pickup Pickup Alarm of Function 32_4
32_4 Pickup Pickup of Function 32_34
General Pickup General Pickup
32_1 Virtual Trip Virtual trip of Function 32_1
32_2 Virtual Trip Virtual trip of Function 32_2
32_3 Virtual Trip Virtual trip of Function 32_3
32_4 Virtual Trip Virtual trip of Function 32_4
General Virtual Trip General Virtual Trip
32_1 Blocked Function 32_1 Blocked
32_2 Blocked Function 32_2 Blocked
32_3 Blocked Function 32_3 Blocked
Close Breaker Close Breaker
32_4 Blocked Function 32_4 Blocked
Input 1 Digital input 1
Input 2 Digital input 2
Breaker Closed Breaker Closed
EEPROM failure EEPROM failure
User Settings User Settings
READY Active when the relay is in service and at least one element has its trip
enabled
ACTIVE GROUP Group 2 active
Local It's Local when the HMI is inside the MAIN SETTINGS, ADVANCED
SETTINGS or OPERATIONS menu
MIWII Directional Power Protection System
6 I/0 CONFIGURATION
GEK-113308