Relay Setting - GE Multilin MIWII Instruction Manual

9.7 RELAY SETTING

9 RELAY COMMISSIONING
9.7RELAY SETTING
When the relay is shipped from the factory, it comes with a default set of settings, which act as the starting point for the
following tests.
Since the MIWII relay has a large number of settings, a list of all the settings necessary for all tests will not be given here,
but rather only the specific settings required for each test indicated.
These tests are only valid for the default factory configuration. Different configurations involving modifications in certain
elements, such as different contact configuration, will require a subsequent modification of the test procedure.
9
9-8 MIWII Directional Power Protection System GEK-113308