FUEL SUPPLY SYSTEM
4(2/44,% "/$9
a
CAUTION
The screws (1) for the standard adjustment of the
throttle valves and for increasing idling (2) are paint-
ed and cannot be adjusted.
Only when the whole cable support bracket (3) is re-
placed can the two adjusting screws be turned.
The two M4x12 screws (4) fastening the throttle valve
potentiometer are painted and can only be removed
in the event the actual sensor is replaced.
4.8.1 REMOVING THE INJECTORS
See 4.8.2 (REMOVING THE THROTTLE BODY).
See 6.4.12 (CHECKING THE INJECTORS) for the
checking procedure.
4.8.2 REMOVING THE THROTTLE BODY
Carefully read 0.2.1 (PRECAUTIONS AND GENERAL
INFORMATIONS).
Partially remove the fuel tank, see 7.1.4 (PARTIAL RE-
MOVAL OF THE FUEL TANK).
Remove the air filter casing, see 7.1.7 (REMOVING
THE AIR CLEANER CASE).
Disconnect the electric connectors:
– right injector (5);
– left injector (6);
– intake pressure sensor (7);
– throttle valve potentiometer (8).
a
CAUTION
When reassembling, make sure the electric connec-
tors are plugged in properly.
4
- 12
RSV mille