Use Of Consumables - APRILIA RSV mille 956X Service And Repair Manual

GENERAL INFORMATION

1.7.2 USE OF CONSUMABLES

Product
Engine oil (*)
LOCTITE ® 243 (**)
LOCTITE ® 648 (**)
1 - 12
Code
8116050 – Assembly of rivets on fork, dashboard/front fairing mount, saddle
support and frame.
– Assembly of frame/engine and frame/fork adjusting bushes.
– Assembly of fairlead screws on frame.
– Insertion of steering head bearings.
– Steering head upper bush.
– On timing intermediate gear roller bearings.
– On lower countershaft thrust washer.
– Clutch disengaging shaft.
– On valve stems and valve lifter buckets.
– On valve guide oil seals.
– On camshaft housings.
– On the timing chain tightener.
– On double starter gear and idler gear pins.
– On the freewheel gear/freewheel contact surface.
– On the freewheel inner contact surface.
0897651 – Fastening of steering shock absorber bush.
– Fastening of rear brake caliper lock pin.
– Fastening of pinion.
– Fastening of rear brake lever pin.
– Fastening of cooling electrofan on support.
– Fastening of fuel return pipe connection.
– Fastening of fuel filler cap.
– Throttle cable pullet fastening nut.
– Throttle cable support bracket fastening screws.
– Throttle valve pin fastening nut.
– Throttle valve potentiometer fastening screws.
– On coolant pump centre fastening screw.
– On cylinder joining bracket fastening screws.
– On engine half-casing bearing lock screws.
– On cylinder fastening studs.
– On driving shaft position sensor fastening screws.
– On index lever and plate fastening screws.
– On driving shaft fastening nut.
– On timing gear fastening screws.
– On upper countershaft counterweight fastening nut.
– On intermediate timing gear bearing support lower fastening
screw.
0899788 – On coolant pump idler gear pin.
– On engine oil pump plug.
– On clutch gear metal slip fastening screws.
– Assembly freewheel on magnetic wheel.
– On freewheel fastening screws.
– On clutch housing fastening nut.
– On lower countershaft counterweight fastening screw.
– On flywheel rotor inner cone.
– On flywheel fastening screw.
Description of use
RSV mille
=
FOLLOW