APRILIA RSV mille 956X Service And Repair Manual page 94

RSV mille
Remove the complete throttle body (23), see 4.8.2 (RE-
MOVING THE THROTTLE BODY).
NOTE
The three-way manifold (24) may be kept fitted.
Obtain appropriate pliers to attach the clamps, or screw-
driver-type pipe clamps to replace the original ones (spe-
cial type without screw).
To release the head off the pipe clamp (25 - 26 - 27).
Remove the complete thermal expansion valve (28),
see 5.6 (REMOVING THE THERMAL EXPANSION
VALVE) together with the three couplings.
Slip the coupling (29) off the coolant pump.
a
CAUTION
Free all the cables and pipes from the respective
clamps located at intervals along their routes.
Procure an equal number of clamps to be used for re-
fitting.
Plug all openings on the engine, pipes and couplings
to prevent foreign bodies getting in.
Gather the electric cables together and secure them in
place with adhesive tape so that they do not get in the
way of the engine being lifted out from underneath.
ENGINE
3 - 11