FUEL SUPPLY SYSTEM
4.8.3 DISASSEMBLING THE THROTTLE BODY
Carefully read 0.2.1 (PRECAUTIONS AND GENERAL
INFORMATIONS).
Unscrew and remove the M8x1 nut (1) and remove the
spring washer.
Turn the throttle valve control lever (2) slightly, unscrew
and remove three hex-head M5x12 screws (3).
Slip the whole support bracket (4) securing the throttle
cables, with the two bushes (5) and the torsion spring
(6), off the throttle body.
Unscrew and remove the two M 6x16 screws (7) and
remove the fuel pressure regulator (8) complete with O-
ring.
Unscrew and remove the three M6x25 screws (9) and
remove the left injector support (10) - together with the
relevant gasket (11), injector (12) and sealing ring (13)
- from the throttle body.
NOTE
The injector's sealing ring (13) may be kept in-
serted in the slot on the throttle body.
4
- 14
RSV mille