APRILIA RSV mille 956X Service And Repair Manual page 164

RSV mille
Remove the freewheel (10) from the relevant housing
(11) and check the rollers of the freewheel (10) for
signs of wear.
Check whether the external helical spring is preloaded
enough to keep the rollers in place.
Check the sliding surface of the freewheel inside the
relevant housing (11) for signs of wear.
NOTE
Should the sliding surface feature signs of dis-
tortion or deep grooves, the freewheel housing must be
replaced.
FREEWHEEL HOUSING - DISASSEMBLY
Unscrew and remove the three M8x16 T.C.E.I. screws
(12) and detach the freewheel housing (11) from the
magnetic wheel (13).
FREEWHEEL HOUSING - ASSEMBLY
a
CAUTION
®
Use LOCTITE 648 on the flat surface of the housing
(11).
Apply a coat of LOCTITE
freewheel housing (11) and place it in the centre of the
magnetic wheel (13).
Apply a coat of LOCTITE
cheese-headed screws (12) and screw the freewheel
housing onto the magnetic wheel.
Driving torque of screws (12): 30 Nm (3.0 kgm).
®
C = LOCTITE 648.
®
648 on the flat surface of the
®
648 on the three M8x16
ENGINE
3 - 81