APRILIA RSV mille 956X Service And Repair Manual page 137

ENGINE
TAKING THE GEARSHIFT APART
Secondary shaft
Use crimpers to remove the seeger rings (4).
Remove the gearshift gears from the secondary shaft,
starting with the idle gear of 1
ing on to the shim washers (2), roller cages (3), seeger
rings (4) and shim rings (5).
Primary shaft
Use crimpers to remove the seeger rings (7).
Remove the gears from the primary shaft, starting with
nd
the fixed gear of 2 gear (6) and then moving on to the
seeger rings (7), shim rings (8), the roller bearing (9)
and shim washer (10).
3 - 54
st
gear (1) and then mov-
RSV mille