APRILIA RSV mille 956X Service And Repair Manual page 197

ENGINE
Fit the washer (19), support cup (20), diaphragm (21),
cup (22) and spring washer (23) on the clutch disen-
gaging shaft (24) and secure them with an M12 stop
nut (25) previously coated with LOCTITE
Driving torque of nut (25): 30 Nm (3.0 kgm).
a
CAUTION
In order to tighten the stop nut, the diaphragm (21)
must not be fixed in the clutch cover retainers (26).
NOTE
Fit the support cup (20) and cup (22) on the
clutch disengaging shaft with the rounded edge (27) fac-
ing out.
NOTE
Hold the diaphragm (21) still on the clutch disen-
gaging shaft (24), using a bent hexagon-head driver.
Rotate the complete clutch disengaging shaft (24) and
fasten the diaphragm (21) in the clutch cover retainers
(26).
Insert the preassembled diaphragm disc (28) and se-
cure it with the eight M5 T.C.E.I. screws (29).
Driving torque of screws (29): 5 Nm (0.5 kgm).
3 - 114
®
648.
RSV mille
26
21
29
28