Clutch And Primary Transmission Assembly - APRILIA RSV mille 956X Service And Repair Manual

RSV mille
3.6.17 CLUTCH AND PRIMARY TRANSMISSION
ASSEMBLY
Carefully read 0.2.1 (PRECAUTIONS AND GENERAL
INFORMATIONS).
Check the lined discs (1) and steel discs (2) for cracks
or any distortion (3) by placing them on a flat surface.
Max. permissible distortion (3): 0.15 mm.
NOTE
The inside discs (2) must not feature grooves or
temper colours.
Measure the width (4) of the driving element and the
thickness of the lined discs (1).
Measure the set of the nine lined discs.
Wear limit min. 30.9 mm.
Measure the set of discs with all the discs together (5)
(made up of 10 steel discs and 9 lined discs).
Wear limit (5) min. 46.3 mm.
Measure the length of the individual clutch springs (6)
in the released position.
Wear limit (6) min. 44.0 mm.
NOTE
You are strongly recommended to replace all the
clutch springs together with the set of lined discs.
ENGINE
3 - 59