Reset Counters For Consumable Parts (Function Code 88) - Brother HLL3290CDW Service Manual

1.3.36 Reset counters for consumable parts (Function code 88)

< Function >
This function is performed to reset the counter for each consumable part in the main PCB after
that has been replaced.
< Operating Procedure >
(1) For models with touch panel
Press the [8] twice in the initial state of maintenance mode. "Reset-Fuser Unit" is
displayed on the LCD.
For models without touch panel
Press the [▲] or [▼] in the initial state of maintenance mode to display
"MAINTENANCE 88" on the LCD, and press the [OK]. "Reset-Fuser Unit" is displayed
on the LCD.
(2) Press the [▲] or [▼] to display the part with the counter to be reset on the LCD, and press
the [Start] or [Mono Start].
Enter the type selection of fuser unit only when the "Reset-Fuser Unit" is selected. After
selecting the "Reset-Fuser Unit", press the [▲] or [▼] to select the last digit value of the
serial number of fuser unit, and press the [Start] or [Mono Start].
(3) "*******OK?" is displayed on the LCD. Press the [Start] or [Mono Start] to reset the counter
for the selected part and return the display to the procedure (2). (******* represents the
name of the selected part)
(4) Press the [X] or [Stop], and the machine returns to the initial state of maintenance mode.
Selectable parts are shown in the table below.
Error display
Reset-Fuser Unit
Reset-PF Kit T1
Reset-PF Kit MP
Reset-LVPS
Part name
Fuser unit
PF kit 1
PF kit MP
Low-voltage power supply
PCB
5-81
Counter to be reset
Printed pages counter
Printed pages counter
Printed pages counter
Irregular power supply detection
counter
Confidential