Brother HLL3290CDW Service Manual page 125

■
Error code 9001
The size of paper loaded in the MP tray and the one specified from the driver are not same
when printing from the MP tray.
Error code 9002
The size of paper loaded in the T1 and the one specified from the driver are not same when
printing from the T1.
<User Check>
• Change the driver setting to be matched with the size of the paper set in the paper tray.
Step
Registration rear actuator caught
1
in some sections of the machine
2 Registration rear sensor failure
3 Main PCB failure
■
Error code 9201
When printing from the MP tray, paper type setting in the machine does not match the setting
in the driver.
Error code 9202
When printing from the T1, paper type setting in the machine does not match the setting in the
driver.
<User Check>
• Use the same paper type setting for the machine and driver.
Step
1 Malfunction of the main PCB
2 Main PCB failure
■
Error code 9301
When printing from the MP tray, the MP paper empty sensor detected that no paper was in the
MP tray.
<User Check>
• Load paper to the MP tray.
Step
MP paper empty actuator caught
1
in some sections of the machine
Connection failure of the MP
2
paper empty sensor harness
3 Main PCB failure
Cause
Cause
Cause
2-89
Remedy
Reattach the registration rear actuator.
Replace the paper feed unit.
Replace the main PCB.
Remedy
Install the latest main firmware.
Replace the main PCB.
Remedy
Reattach the MP paper empty actuator.
Reconnect the MP paper empty sensor
harness.
Replace the main PCB.
Confidential