Brother HLL3290CDW Service Manual page 296

Assembling Note:
• Raise the Damper L ASSY. Rotate the DEV release gear Z34 counterclockwise until it
stops. Align the end of the DEV clutch cam with the reference line of the DEV cam cover,
and then attach the DEV release drive gear Z33. If you neglect to do this, the error code
6E00 occurs.
Damper L ASSY
<Left side>
Reference line of DEV cam cover
DEV clutch cam
Fig. 3-93
3-105
DEV release gear Z34
(The shaft part in the center)
DEV release drive gear Z33
Confidential