Brother HLL3290CDW Service Manual page 251

(7) Remove the two Screw pan (S/P washer) M3x12DB screws to remove the Shield plate
from the Panel unit.
(8) Remove the LCD from the Panel unit.
(9) Remove the LCD blind film from the Panel unit.
(10) Remove the Key holder ASSY from the Panel unit.
(11) Remove the Touch panel ASSY from the Panel unit.
Screw pan (S/P washer) M3x12DB
Shield plate
LCD
Key holder ASSY
LCD blind film
Touch panel ASSY
Panel unit
Fig. 3-41
Assembling Note:
• If you replaced the Touch panel ASSY, refer to "4. IF YOU REPLACE THE LCD, PANEL
UNIT OR PANEL PCB" in Chapter 4 to configure settings.
3-60
Confidential