(4) Open the Manual feed cover ASSY. Release each Boss to remove the Manual feed cover
ASSY from the Inner front cover.
(5) Remove the two Taptite bind B M3x10 screws to remove the USB holder ASSY from the
Inner front cover.
(6) Remove the two Screw pan (S/P washer) M3x12DB screws to remove the USB ground
plate and the USB host PCB from the USB holder ASSY.
USB ground plate
Screw pan (S/P washer)
M3x12DB
Boss
Fig. 3-80
USB host PCB
Fig. 3-81
3-93
Inner front cover
Boss
Manual feed cover ASSY
Inner front cover
USB holder ASSY
Taptite bind B
M3x10
Confidential