Assembling Note:
• Attach the FFC holder ASSY to the ADF sensor harness ASSY and the Second side
CIS flat cable as shown in the figure below.
Second side CIS flat cable
Double-sided tape
(5) Remove the three Taptite bind B M4x12 screws to remove the Hinge ASSY L from the
ADF unit.
ADF sensor harness ASSY
Fig. 3-24
ADF unit
Fig. 3-25
3-45
FFC holder ASSY
Taptite bind B M4x12
Hinge ASSY L
Confidential