Table of Contents
Advertisement
Error message
First line
Size Error DX
Press Stop Key.
Specify the correct
paper and load the
same size paper as
the Printer driver
setting.
Specify the correct
paper.
Size
Fax received. Set
mismatch
correct paper size
in menu.
Reload correct
paper in the MP
Tray, then press
Start.
Reload correct
paper in Tray1,
then press Start.
Reload correct
paper.
Small paper
Open the Back
Cover and then
press Start.
Storage Full
There is no space
in the Flash
Memory.
Toner Error
One or more Toner
Cartridges are not
detected. Pull out
and reinsert all 4
Toner Cartridges.
Toner Low:
-
BK
Toner Low: C
-
Second line
For 2-sided printing, paper size
setting of the printer driver that
was not supported by 2-sided
printing was selected.
The registration rear sensor
detected that the paper fed was
smaller or larger than the
specified size in 2-sided
printing.
Paper size is not set to the
specified size when receiving
fax.
The size of paper loaded in the
MP tray and the one specified
from the driver are not same
when printing from the MP tray.
The size of paper loaded in the
T1 and the one specified from
the driver are not same when
printing from the T1.
Detected that the size of paper
set in the T1 was over 10 mm
shorter than letter size during
receiving fax data or printing a
list or report.
The paper size indicated for
printing data while the back
cover is closed was under the
specified value.
Storage memory was full and
data could not be saved.
The develop release sensor
detected the develop roller
disengagement or engagement
failure.
Dot counter of the toner
cartridge (black) or develop
roller counter reaches the upper
limit soon.
Dot counter of the toner
cartridge (cyan) or develop
roller counter reaches the upper
limit soon.
2-39
Description
Error
Refer
codes
to:
9701
2-91
8A01
2-87
8E01
2-88
9001
2-89
9002
2-89
8E02
2-88
8D02
2-88
C900
2-103
6E00
2-81
4B01
2-74
4B04
2-74
Confidential
Advertisement
Table of Contents
Troubleshooting
