Communication Errors - Brother HLL3290CDW Service Manual

3.3

Communication Errors

Code 1 Code 2
10
10
11
11
11
11
11
11
11
11
11
13
16
17
17
1C
1C
1C
1C
1C
1C
1C
1D
1D
1D
07 No document set when calling.
08 Wrong fax number called.
01 No dial tone detected before dialing.
02 Busy tone detected before dialing.
03 2nd dial tone not detected.
05 No loop current detected.
06 Busy tone detected after dialing or receiving a call.
07 No response from the receiver in sending.
08 No response from the remote station in sending Session
Initiation Protocol (SIP).
10 No tone detected after dialing.
11 No acknowledgement returned after Fax2 net command
was sent.
12 Error signal received after Fax2 net command was sent.
09 No Cipher registration
01 Called using a dial number that cannot be used for the
NGN line (33 digits or longer or non numeric characters).
07 No response from the caller in receiving.
01 Detected that access to the NGN line was not authorized.
(T38: 403 Forbidden)
02 No file or folder (directory) found as a result of search via
the NGN line. (T38: 404 Not Found)
03 Remote station does not support the NGN line. (T38: 488
Not Acceptable Here)
04 SIP (Session Initiation Protocol) connection not possible.
(T38)
USW NGN fax setting is OFF or calling attempted before
acquisition of SIP information.
05 Internal error detected in the communication network.
(T38)
06 SIP Server timeout (T38)
08 An error other than
1C01,1C02,1C03,1C04,1C06,1D01,1D02 or 1D04 was
detected.
01 Detected that the NGN line was busy. (T38: 486 Busy)
02 Detected that the NGN line was temporarily unavailable.
(T38: 480 Temporarily Unavailable)
04 Network cable not connected (Link Down detected) or not
connected to the Network. (T38)
Cause
2-58
Refer to:
4.11.1
4.13.1
4.13.1
4.13.1
4.13.1
4.13.1
4.13.1
4.13.1
4.13.3
4.13.1
4.13.1
4.13.1
4.13.1
4.13.2
4.13.2
4.13.3
4.13.3
4.13.3
4.13.3
4.13.3
4.13.3
4.13.3
4.13.3
4.13.3
4.13.3
Confidential