Brother HLL3290CDW Service Manual page 86

Error message
First line
Print Unable Turn the power off
09 and then back on
again.
Print Unable Turn the power off
0A and then back on
again.
Print Unable Turn the power off
0B and then back on
again.
Print Unable Turn the power off
0C and then back on
again.
Print Unable Turn the power off
0E and then back on
again.
Print Unable Turn the power off
10 and then back on
again.
Print Unable Turn the power off
1D and then back on
again.
Print Unable Turn the power off
1E and then back on
again.
Print Unable Turn the power off
2E and then back on
again.
Second line
Detected irregular power supply
for more than 100 times.
Main PCB detected the fan
failure.
An error occurred in the high-
voltage power supply PCB while
operating.
An error occurred in the high-
voltage power supply PCB
when the machine was in the
ready state.
An error occurred in the density
sensor.
An error occurred during the
high-voltage power supply PCB
ID check.
The registration mark sensor R
is dirty and cannot normally
receive reflected light.
The registration mark sensor L
is dirty and cannot normally
receive reflected light.
A communication error occurred
in the LED ASSY (black).
A communication error occurred
in the LED ASSY (yellow).
A communication error occurred
in the LED ASSY (magenta).
A communication error occurred
in the LED ASSY (cyan).
Main PCB and LED control PCB
cannot access each other.
Cannot read/write in the main
PCB and LED control PCB.
Could not communicate with the
cartridge sensor on the machine
side.
Cartridge sensor on the
machine side does not work.
Cartridge sensor version on the
machine side is not available.
2-50
Description
Error Refer
codes to:
0900 2-65
0A02 2-65
0B01 2-66
0B02 2-66
0C00 2-66
0E00 2-66
1003 2-67
1004 2-67
1D01 2-68
1D02 2-68
1D03 2-68
1D04 2-68
1E01 2-68
1E02 2-68
2E00 2-71
2E02 2-71
2E04 2-71
Confidential