Check Consumables Function (Function Code 57) - Brother HLL3290CDW Service Manual

1.3.18 Check consumables function (Function code 57)

<Function>
This function is used to determine whether the toner cartridge is supported, cartridge's color,
destination, and size with the cartridge sensor.
<Operating Procedure>
■
Whether the toner cartridge is supported or not
For models with touch panel
(1) Press the [5], and then [7] in the initial state of maintenance mode. "IC_ACT ALL" is
displayed on the LCD.
(2) Press the [1]. "IC_ACT ALL" is still displayed on the LCD.
(3) Press the [◄] or [►] to display the toner cartridge to be authorized on the LCD.
If you want to select all colors:
If you want to select black:
If you want to select magenta:
If you want to select cyan:
If you want to select yellow:
If you want to select the toner sensor on the machine: "IC_ACT MAIN"
(4) Press the [Mono Start]. Selected toner cartridge will be authorized.
If it is authorized, "IC_ACT OK" is displayed on the LCD.
If the authorization failed, "IC_ACT NG**" is displayed on the LCD.
(** indicates an error number.) Refer to the <Error display> table below to solve it.
<Error display>
LCD
NG0 to NG99
NG100 to NG199
NG200 to NG299
NG300 to NG399
Memo:
When NG was displayed after performing the "IC_ACT ALL", which color cartridge had
error cannot be determined. In that case, select the color individually and perform.
(5) Press the [X]. The machine returns to the initial state of maintenance mode.
Failed to communicate with the cartridge sensor on the machine.
Failed to communicate with the cartridge sensor on the cartridge.
Installed toner cartridge is not recognized by the cartridge sensor.
Communication succeeded but the cartridge data was deemed
incompatible.
5-39
"IC_ACT ALL"
"IC_ACT BLACK"
"IC_ACT MAGENTA"
"IC_ACT CYAN"
"IC_ACT YELLOW"
Description
Confidential