Registration Mark Sensor L Pcb / Registration Mark Sensor R Pcb - Brother HLL3290CDW Service Manual

9.39 Registration mark sensor L PCB /
Registration mark sensor R PCB
(1) Turn the machine face up.
(2) Release the Registration mark sensor L harness and the Registration mark sensor R
harness from the securing fixtures.
(3) Release the Hook, and then remove the REGI stopper from the Registration mark sensor
ASSY in the direction of the arrow.
(4) Remove the Taptite bind S M3x5 screw to remove the Registration mark sensor ASSY.
REGI stopper
Taptite bind S M3x5
Hook
Harness routing: Refer to
Registration mark sensor L harness
<Top side>
Fig. 3-111
"15. Registration mark sensor ASSY, Eject sensor
Registration mark
sensor R harness
Registration mark sensor ASSY
3-123
PCB".
Confidential