D027VB001-00
USA/CAN
Version 0
EN
Unpack the machine and check the components
Toner Cartridge and Drum
(Black, Cyan, Magenta, and
* Installed in the machine
1
Remove the packing materials and re-install the toner cartridge and drum unit assemblies
Remove all the blue packing tape.
Remove the orange parts
from each cartridge.
2
Load paper in the paper tray
3
Connect the power cord and turn the machine on
Back
Quick Setup Guide
HL-L3300CDW / DCP-L3560CDW / MFC-L3720CDW / MFC-L3760CDW / MFC-L3765CDW /
MFC-L3780CDW / MFC-L8395CDW
Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
Not all models are available in all countries.
Video setup instructions:
support.brother.com/videos
Waste Toner Box*
Unit Assemblies*
Yellow)
AC Power Cord
x4
BK
Location of the power button varies depending on the model.
Belt Unit*
Quick Setup Guide
Product Safety Guide
Push firmly.
C
M
Y
Adjust the paper
guides.
Front
The latest manuals are available at the Brother support website:
support.brother.com/manuals
NOTE:
• Manuals in Spanish for this model are available at
support.brother.com.
Manuales en Español para este modelo están disponibles en
support.brother.com.
• The components included in the box may differ depending on your
country.
• The available connection interfaces vary depending on the model.
You must purchase the correct interface cable if you require one.
• USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no
more than 6 feet (2 meters) long.
• Network cable (DCP-L3560CDW / MFC-L3765CDW /
MFC-L3760CDW / MFC-L3780CDW / MFC-L8395CDW)
Use a straight-through Category 5 (or greater) twisted-pair cable.
• The illustrations in this Quick Setup Guide show the MFC-L3780CDW.
Do not exceed this mark.
NOTE:
Before connecting the power cord, locate the
Serial Number label on the back or side of the
machine. Record this number for Registration
and Warranty support.
Need help?
Do you have a question about the HL-L3300CDW and is the answer not in the manual?
Questions and answers
How to reset Toner? I replaced the cartilage but it won’t reset to print. it is a HL-L3300CDW