Joint Cover Assy - Brother HLL3290CDW Service Manual

9.16 Joint cover ASSY

(1) Open the Joint cover ASSY.
(2) Remove the Taptite pan (washer) B M4x12DA screw to remove the LED ground wire. Pull
out the LED ground wire through the Hole of the Side frame R.
(3) Release each Hook to remove the Arm R from the Joint cover ASSY.
Hooks
Joint cover ASSY
Hole of the Side frame R
Arm R
LED ground wire
Taptite pan (washer) B M4x12DA
<Right side>
Fig. 3-54
3-71
Confidential