Table of Contents
Advertisement
Error message
First line
Document
Clear the scanner
Jam
jam, then press the
Stop Key.
Drum !
Slide the Green tab
on Drum Unit.
Black (BK)/ Cyan
(C)/ Magenta (M)/
Yellow (Y).
Drum End
-
Soon:BK
Drum End
-
Soon:C
Drum End
-
Soon:M
Drum End
-
Soon:Y
Second line
The document scanning
position sensor detected that
the document length was 90 cm
or more during the one-side
scanning.
The document scanning
position sensor has not
detected the document passing
even after the document has
been fed for the specified time.
Electrified terminal or GRID
terminal signal detected that the
black drum was not installed
when the machine was turned
ON.
Electrified terminal or GRID
terminal signal detected that the
cyan drum was not installed
when the machine was turned
ON.
Electrified terminal or GRID
terminal signal detected that the
magenta drum was not installed
when the machine was turned
ON.
Electrified terminal or GRID
terminal signal detected that the
yellow drum was not installed
when the machine was turned
ON.
Electric discharge that may be
caused by dirt on the corona
wire of the drum unit was
detected.
Number of the black drum unit
rotations reaches the upper limit
soon.
Number of the cyan drum unit
rotations reaches the upper limit
soon.
Number of the magenta drum
unit rotations reaches the upper
limit soon.
Number of the yellow drum unit
rotations reaches the upper limit
soon.
2-28
Description
Error
Refer
codes
to:
A200
2-97
A300
2-97
620A
2-77
620D
2-77
620C
2-77
620B
2-77
6A00
2-81
4001
2-72
4004
2-72
4003
2-72
4002
2-72
Confidential
Advertisement
Table of Contents
Troubleshooting
