Brother HLL3290CDW Service Manual page 84

Error message
First line
No Paper MP Reload paper in MP
Tray.
No Paper T1 Reload paper in
Tray 1.
No Toner Open the Top
Cover, then install
Toner Cartridge.
Black(BK).
Open the Top
Cover, then install
Toner Cartridge.
Cyan(C).
Open the Top
Cover, then install
Toner Cartridge.
Magenta(M).
Open the Top
Cover, then install
Toner Cartridge.
Yellow(Y).
No Tray T1 Reinstall Tray 1.
No Waste Install the Waste
Toner Toner Box.
Second line
When paper was fed from the
MP tray, the MP paper empty
sensor detected that no paper
was in the MP tray.
(At Fax / List printing)
When printing from the MP tray,
the MP paper empty sensor
detected that no paper was in
the MP tray.
When paper was fed from the
T1, the T1 paper feed sensor
detected that no paper was in
the T1.
(At Fax / List printing)
When printing from the T1, the
T1 paper feed sensor detected
that no paper was in the T1.
Developing terminal voltage
detected that the toner cartridge
(black) was not installed.
Developing terminal voltage
detected that the toner cartridge
(cyan) was not installed.
Developing terminal voltage
detected that the toner cartridge
(magenta) was not installed.
Developing terminal voltage
detected that the toner cartridge
(yellow) was not installed.
The T1 paper feed sensor
detected that the T1 is open
when printing from the T1
(before the registration of
printing in the engine).
The T1 paper feed sensor
detected that the T1 is open
when printing from the T1 (after
the registration of printing in the
engine).
The electrodes of the high-
voltage power supply PCB
detected that no waste toner
box was set.
2-48
Description
Error Refer
codes to:
--- 4.2.2
9301 2-89
--- 4.2.1
9302 2-90
6101 2-76
6104 2-76
6103 2-76
6102 2-76
8501 2-86
8505 2-86
6300 2-79
Confidential