Brother HLL3290CDW Service Manual page 80

Error message
First line
Document Clear the scanner
Jam jam, then press
Stop[x].
Drum ! Open the Top
Cover.
Pull out the drum
unit and toner
cartridge.
Slide the Green tab
on Drum Unit.
Open the Top
Cover. Black
Pull out the drum
unit and toner
cartridge.
Slide the Green tab
on Drum Unit.
Open the Top
Cover. Cyan
Pull out the drum
unit and toner
cartridge.
Slide the Green tab
on Drum Unit.
Open the Top
Cover. Magenta
Pull out the drum
unit and toner
cartridge.
Slide the Green tab
on Drum Unit.
Open the Top
Cover. Yellow
Pull out the drum
unit and toner
cartridge.
Slide the Green tab
on Drum Unit.
Second line
The document scanning
position sensor detected that
the document length was 90 cm
or more during the one-side
scanning.
The document scanning
position sensor has not
detected the document passing
even after the document has
been fed for the specified time.
Electric discharge that may be
caused by dirt on the corona
wire of the drum unit was
detected.
Electrified terminal or GRID
terminal signal detected that the
black drum was not installed
when the machine was turned
ON.
Electrified terminal or GRID
terminal signal detected that the
cyan drum was not installed
when the machine was turned
ON.
Electrified terminal or GRID
terminal signal detected that the
magenta drum was not installed
when the machine was turned
ON.
Electrified terminal or GRID
terminal signal detected that the
yellow drum was not installed
when the machine was turned
ON.
2-44
Description
Error Refer
codes to:
A200 2-97
A300 2-97
6A00 2-81
620A 2-77
620D 2-77
620C 2-77
620B 2-77
Confidential