Save The Netconfig Information (Function Code 18) - Brother HLL3290CDW Service Manual

1.3.8

Save the NetConfig information (Function code 18)

< Function >
This function is to save the NetConfig information to USB flash memory.
< Operating Procedure >
(1) Press the [1], and then the [8] in the initial state of maintenance mode. "NETCONFIG" is
displayed on the LCD.
(2) Set the USB flash memory to the USB host terminal.
(3) Press the [SET]. "SAVE TO USB" is displayed on the LCD.
(4) Press the [SET]. "USB SAVING" is displayed on the LCD and "NetConfig" folder is
created in the USB flash memory. NetConfig information is saved as "CFG-PAGE_**.txt"
in the folder and returns to the initial state of maintenance mode.
"**" in the file name is the number of NetConfig information appearance in the folder.
If there are no NetConfig information in the folder, the file will be saved as "00" and if the same
name is already in it, the file will be made as "01".
5-15
Confidential