4.
IF YOU REPLACE THE TRANSFER HVPS PCB UNIT OR
REGISTRATION-MARK SENSOR PCB ASSY 1, 2
<What to do when replacing the transfer HVPS PCB unit or registration-mark
sensor PCB ASSY 1, 2>
Adjustment of Color Registration (Maintenance Mode 66)
<Procedures>
Adjustment of Color Registration (Maintenance Mode 66)
Refer to
"1.4.17 Adjustment of Color Registration" in Chapter
adjustment of color registration.
Note:
If an error occurs after executing Maintenance Mode 66, upgrade the firmware to the latest
one. (Refer to
chapter.) After upgrading the firmware, execute Maintenance Mode 66 again.
"Rewriting the firmware (Main firmware, Sub firmware (PCL/PS))" in this
4-15
5, and perform the automatic
Confidential