Table of Contents
Advertisement
28
Reach into the compartment and disconnect the connector on the shutter cable from the
3.
connector mounted to the base of the IsoPlane by pulling it straight up. See
Figure 4-3: Disconnecting Internal Shutter
Use a 9/64" hex wrench to loosen, but not remove, the two hex head socket screws that
4.
secure the shutter housing to the wall of the IsoPlane. See
Figure 4-4: Mounting an Internal Shutter Assembly on an IsoPlane
S
HUTTER
S
HUTTER
Figure
M
S
OUNTING
CREWS
(QTY 2)
Figure 4-3
C
C
ABLE
ONNECTOR
4-4.
Advertisement
Table of Contents
