Slit Width Adjustments For Motorized Slits - Teledyne Everywhereyoulook IsoPlane 320A Manual

Table of Contents

2.3 Slit Width Adjustments for Motorized Slits

The Model 718-1 motorized slit assembly is a

self-calibrating, 10 µm to 3 mm adjustable bilateral slit.

Stepping-motor-controlled adjustments are made in 1 µm

increments over the full range. The Model 718-12 motorized

slit assembly is a self calibrating, 10 µm to 12 mm adjustable

bilateral slit. Stepping-motor controlled adjustments are

made in 5 µm increments over the full range.

Full control of the slit, including automated bandpass setting,

is integrated into LightField

The slit motor is energized only when you send a command

via the software to control it. When spectrograph power is

turned off, the slit remains in the position to which it was last

set. This position is stored in nonvolatile memory allowing

slit position to be maintained with power on or off.

and SpectraSense™ software.

Table of Contents