Connecting The Isoplane To A Computer - Teledyne Everywhereyoulook IsoPlane 320A Manual

74
E.2 Connecting the IsoPlane to a Computer
The IsoPlane has been designed to be operated and controlled by a host computer using the
RS-232 or USB interface.
IsoPlane operations which can be controled include:
•
•
•
•
•
•
Wavelength scanning at a pre-set linear scan rate;
Change of scanning speeds;
Grating selection;
Rapid GOTO wavelength positioning;
Changing of grating turrets;
"Jogging" wavelength positioning.
REFERENCES:
Refer to the Monochromator Control software for Windows for
complete information about using an IsoPlane with a computer.