Microscope Interface; Table C-5: Accessories: Microscope Interface - Teledyne Everywhereyoulook IsoPlane 320A Manual

66
Table C-4: Accessories: Detectors (Sheet 2 of 2)
Part Number
SI-440-UV
ID-441
ID-441-C
442-1 A
SpectraHub
C.5 Microscope Interface
Refer to

Table C-5: Accessories: Microscope Interface

Part Number
MicroSpec
SI-440 General-Purpose Single Channel Detector
10 mm diameter active area
Wavelengths: 400 nm - 1100 nm
Enclosed in housing with the BNC connector.
Single Channel Detector
UV-enhanced, 10 mm diameter active area
Wavelengths: 200 nm - 1100 nm
InGaAs Detector
Includes pre-amplifier
Uncooled version.
InGaAs Detector
Includes pre-amplifier
Cooled version.
Requires Model 442-1A thermoelectric cooling for operation.
Thermoelectric Cooling System
For use with ID-441 InGaAs detector.
SpectraHub Data Acquisition System
20-bit A-D converter, single channel detector interface.
Requires SpectraSense software.
Table C-5 for information about available microscope interfaces.

Microscope Interface

Allows researchers to perform high quality imaging and spectroscopy with a single
system. Attaches to a UDP port on an inverted microscope and couples to the IsoPlane
SCT 320.
For additional information, refer to the MicroSpec data sheet which is available on the
Princeton Instruments website.
Description
Description