System Partition; Smartstart And Support Software Cd; Array Configuration Utility Diskettes - Compaq 219700-001 - ProLiant - 1500 Reference Manual

NetWare
The Compaq Array Configuration Utility for NetWare (CPQONLIN.NLM), is
available on the NetWare Programs from Compaq (NPFC) diskettes in the
\DRV_ARRY directory. Generate the NPFC diskettes using the Diskette
Builder feature in SmartStart. The NPFC diskettes have an ARRAY.RDM
readme file to access instructions on loading and using CPQONLIN.NLM.

System Partition

If SmartStart has been run on the server before, the Array Configuration
Utility program should already be installed on the system partition.
1. Power off, then power on the server.
2. When the cursor is in the upper-right hand corner of the screen, press
10.
3. Navigate through the menus to the Array Configuration Utility program.

SmartStart and Support Software CD

You can run the Array Configuration Utility directly from the SmartStart and
Support Software CD.
1. Insert the SmartStart and Support Software CD in the CD drive and
power up the server. A menu is displayed.
2. Select Configure Hardware from the menu, then select the Array
Configuration Utility.
3. After completing the configuration, remove the CD and restart the server.

Array Configuration Utility Diskettes

You can run the Array Configuration Utility from diskettes made using the
Diskette Builder feature on the SmartStart and Support Software CD.
1. Boot the server from the Compaq SmartStart and Support Software CD.
Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002
File Name: F-CH05.DOC Last Saved On: 2/27/98 11:38 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
SMART-2DH Array Controller Reference Guide
5-3