3. Installing the Robacta TC 2000 cleaning unit
General
A Robacta TC 2000 cleaning unit or a Robacta Reamer Twin cleaning unit can be moun-
ted on the service station.
Tools required
-
-
-
-
Additionally
The following accessories are required for installing a Robacta TC 2000 cleaning unit on
Required
the welding torch service station:
OPT/i TSS TC2000 (installation set for Robacta TC 2000) ... 4,001,012,CK
Installing the
Robacta TC 2000
Cleaning Unit
46
Torx screwdriver TX25
6 mm Allen key
Slotted screwdriver
Hammer
1
Knock out the round opening
1
Position the mounting plate
2
Use four 6 mm Allen screws and four
3
washers to install the mounting plate